Dzb01r-8 User’s Manual
DZB01r-8 FIREWORKS FIRING SYSTEM
Each machine has a self-test function of ignition, each time before you connect the fireworks, please open the self-test: Turn on power, all the indicator lights off after light for 1 second the power indicator will light, at this time if a connection indicator light flashes means that the ignition had been damaged and can not be used.
Usage method:
1.Turn on the power of the receiver, the power indicator will light, press corresponding keys on the remote controller, if the power indicator off, means the system is in well condition.
2.Straighten up the receiver’s antenna as much as possible, to get the farthest remote distance.
3.Connecting the fireworks products, the connecting test indicator will light, then you can use this firing system now.
4.If this firing system cannot work or the remote distance become short, please check the batteries.If there have a receiver cannot be controlled, please program with the remote control again.DZB01r-8 FIREWORKS FIRING SYSTEM
DZB01r-8 is one kind of cold flame fireworks firing system ,which can make your wedding ,
party and celebration more beautiful.you just put the cold flame fireworks into the hole
and press button ,can display beautiful firework show.The whole set include one remote
with 8 receivers.
You will need to buy locally.
Stage safe cold fireworks machine,Pirotecnica indoor,Cold fireworks fountain,Scenes de concert
Attrezzature per feste,cold pyro,Fireworks,Indoor fireworks,cold spark machine
Technical parameter
Item | Parameters |
Size | 8.2cmx10.5cmx5cm |
Power | 6F22(9V) |
testing current | <1mA |
The largest ignition current | 3A |
Remote Distance: | 100M |
Symbols and instructions
|
Symbols |
instructions |
 |
Power indicator，when the power is on, the indicator will light in green, when in receiving the signal, the indicator light will flash. |
 |
Connecting indicator, when fireworks connecting well, the indicator will light in yellow. |
 |
Battery indicator; when battery runs low, this indicator will be in red. |
 |
Program hole; Put the stick or small screwdriver or some kind of this thing into the hole, one hand keep pressing the stick, the power indicator will flash, then the other hand press the remote controller key, after 3 seconds, first release the stick and then release the remote, And press the remote button again ,if the receiver’s” POWER” light flashing , it means the programmable is finished. ( Note: if the receiver have connecting the fireworks, then cannot do the program, when press the stick, the power indicator will flash quickly). |
|
14Key remote control |
Button 1,2,3,4,5,6,7,8 for fire 8 modules All for fire 8 together Seq for interval fire 0.4S |
