□ DB04r-4 □ DB04r-8 □ DB04r-12 □ DB04r- 24
The product is for fireworks firing, family garden use. Be very cautious while using indoor.
Usage
1. Turn on the power of the receiver, the red power lamp lights up.
2. Check the system – Press the remote buttons one by one, to check if the led under each channel lights up.
3. Connect fireworks to the receiver, the LED will light up green. If the LED does not turn on, bad connecting.
4. Now you can fire the fireworks with the remote.
How to make the receivers programmable
Receivers are programmable – program any receiver of any system to any button of any System remote transmitter. Program all receivers to fire on one remote button, or two receivers on one button or three, etc. Totally flexible setup arrays.
Method: For example, making remote button “5” to control receiver NO5 and NO6. Pls pay attention that NO5 is run by remote”5” originally. Now we only need making NO6 run by remote”5”
Please find a small hole on the top of the receiver, and then put a stick in the hole by one hand. Another hand keep pressing button “6”. In this case, the power lamb will flash. After flashed for more than 3 times. First release the hand with stick, then release the hand for remote. Now if you press remote “5” and receiver NO5 and NO6’s power lambs both off .It means two receivers could controlled by one button. Using the same method and you could run more receivers by a button.
About the QA Quality Assurance
2. If there is very serious problem with the products, we will send the replacement to you very soon.
Products Features
1. Transmitter- with power switch.
2. Receivers- with antenna, signal more stable.
3. Transmitter range:
4. Fire capacity: each channel could fire 5-6pcs display igniters and 1pcs safety igniter.
5. Programmable- one transmitter could control many receivers; a button on a transmitter could control many receivers.
6. Interchangeable: If there is one receiver was broken, you could use other receivers instead only if the receivers are belongs to the same series. Or you just need to buy receivers, don’t need to buy transmitter.
7. Item DB04r-4, DB04r-8 and DB04r-10 has the salvo and sequential fire function. Button”11” is for Salvo fire, button”12” is for Sequential fire.
Attentions:
1. Please connect the products in series.
2. Please do not shake incept box violently, when no need use it.
3. Notice to prevent defile incept box when it’s close to fireworks.
4. Please take the cell out when no use products, for prevent defile incept box.
5.Please don’t place the product in the damp , sour ,alkali and pollution environment.
Transmitter Parameters:
1. Type and Dimension: □small transmitter,7*4*1.5cm □12 button transmitter,13*5*1.8cm □DBR01-X,18*14*7cm
2. Range: □50M-60M □100M-150M □400M-500M
3. Power: □6MW □10MW
4. Frequency: 433MHZ
Db04r Receiver Parameters:
1. Dimension: 11*7*2.5 cm
2. Channels: 4
3. Power: 10.8W
4. Battery: 4pcs AA batteries
5. Fire current: 1.8A
6.Test current:3 MA
7. Weight: 0.1kg
db0r fireworks firing system Pakage
□Paper case:15*11.5*13cm □plastics case:25*22*7cm □plastics case:34*27*8cm
1. On the premise that the products is not broken by purpose. The quality guarantee period is one year. Generally speaking, if there is very small problem with the goods .We will send the replacement part to you with the next order considering of the high shipping cost.
1. Feedback is very important for us. please leave good feedback to us if you get satisfied with our goods and service.
2. Please email us before leaving any negative feedback or opening any dispute on the site. We will help you to resolve the problem.