User’s Manual！Warning！
DBR05-C1 remote electronic ignition
Each machine has a self-test function of ignition,each time before you connect the fireworks, please open the self-test,if a connection indicator light flashes means that the ignition had been damaged and can not be used.
Receiver box on the battery positive and negative do not reversed, as the anti-incorrect ignition risk.
Welcome to choose DBR05 remote electronic ignition of fireworks products!
Explain for Item NO:
DBR05–C1/20
This firing system use the receiver which can adjust the channel numbers freely as you want. It is more flexible and more convenient to use this firing system!
This firing system 1 remote could control 100 receivers at most (the remote digital table will show ”-0” when you adjust to 100th channels”). It has “fire all”, “step fire” and “sequential fire” functions.
Usage method:
How to adjust the channels on the receiver?
To adjust the channel numbers, just press the 2 red buttons, one button is up numbers, and the other is down the numbers. Channels can be adjust from 1~00, one controller can be control at most 100pcs receivers.
How to do the fire:
1).Select any channel that you need to fire: first move the wheel switch on the right size of remote to the channel that you need to fire(for example, if you need fire channel 5, move to 5)and then press the red fire button on remote to fire the receivers that you need;
If you need to fire the receivers one by one, you just need to keep pressing the red button on remote, it can fire the receivers one by one automatically, you don’t need to move the wheel switch again.
. Sequential fire: move the wheel switch and then press the wheel switch one time, the digital table will flashing (For example, move to 10”), it means the sequential time is 1 second, and then press the red fire button on the remote, the receivers will fire from small to large channels sequentially by this time. When you press the wheel switch again, it will not flashing, and now you can select any receiver to fire or step fire. Please note the time is shown in seconds. If the digital table on the remote shows “8”, it means sequential time is 0.8s; If the digital table shows “25”, means the sequential time is 2.5s.
How to Programmable:
Press the receiver’s 2 red button, do not loose, and then press the red fire button on the remote, then the digits on the receiver will flash, after flashed 3 times, loose the receiver button, and then the remote button.
Memory function
There are a small indicate lamp on top right corner of remote.If you select channel 1 ,the indicate lamp turns green, means channel 1 is not fire. And if it turns red, means that channel was fired .you will know which channels are fired or not by this lamp. The lamp will keep red under the situation of fire all or sequential fire. And keep green when the remote turn on. The memory function is off when the remote turns off.
Notes
Turn on the receiver, if the digital table keep flashing, it means the battery power is low, need to change the battery.
Turn on the receiver, if the first digit shows 8.8, means this receiver match the DBR05 remote. If turn on the power, the first digit show 8.8 and keep flashing, means this receiver match DBR01 remote.
Attention
Do not placed the igniter in the water or in damp places.so as not to affect remote control’s distance damage the igniter.
As far as possible upward extension the receiving antenna to enable remote control receive farthest distance.
Normal connecting the ignition herd,testing lights,the can control the ignition,
If the igniter does not work,check the battery, if the distance of remote control received shortened, please check the remote control’s battery; If the remote control of a certain group can not control the ignition,please reconsider the code (see the notes on igniter).
