Reach us through
- No. 148, Laodong Middle Road, Liuyang City, Changsha City, Hunan Province
- +86 18874866129
- sunmoonpyrohp@gmail.com
Social Networks
- instagtrant
- youtube
DBR02-X series firing system is one kind of far distance remote FS researched by our factory. Remote distance could be 500 meters. It is special for the small&medium-sized display. It is with internal Li battery. And it can make sequential fire, salvo fire and step fire function.Happiness Firing System DBR02 operation video.
Total 96 cues ,,but can expand to 2400cues,Each receiver has 24 cues,DBR02 series
transmitter can run 100 receivers (2400cues)in max
Far distance remote range, about 500 meters.
Time range for sequential fire is from 0.1-9.9S
There are memory function for the transmitter. You can know which cues are already fired.It is with powerful internal battery(A grade 2500mAH).which with short circuit,over current and low voltage protecting functions.Furthermore, the LI battery is more stable than the storage battery.
a) Battery capacity:2500m AH*3 Voltage:12.6v Standby current :25mA
b) Ignition voltage:12.6V Test currency:0.5mA MAX Fire currency:5A
e) Dimensions:290mm×220mm×115mm
d) Standby time is 24 hours, and usage time is about 5
The voltage accuracy is +/-0.1V.The low battery indicator will flash when the electricity is lower than 20%. It will flash faster when electricity getting lower, and will turn off the machine below 5%
We have added the wire control function on this system. In case the signal interference is very stronger.Using a normal two cores wire cable for connecting the controller and receivers. The clips is in the back of the cases. There is no difference for positive or negative pole. And then turn on the power of machine,the indicate lamp for connection will get GREEN. It means the wire is connecting well. When we have the wire cable, the remote function is closed. And the operate method is the same as the remote control model. The picture for connection is below:
a) Turn on the power switch for transmitter and receivers. For the receiver,all the LED light will not light means it work well. If there is LED light get red,it means that cue has problem. Please don’t connect products on that channel.
New function: The power lamp will get green if in the safety switch on Test position,and get red if on Fire position.