Wedding fountain fireworks display system
12 Tips for Party Fireworks Ignition Systems
Cold flame pyrotechnic ignition system and balloon detonation system for fireworks displays

This is our new transmitting system. Compared with ordinary receivers, the receiver is replaceable and can be changed to any channel number as needed. There is no need to program the remote control or move the receiver to other locations. It is easy to operate. More convenient to use! You can understand it more clearly through the picture below.

The receiver box is powered by a 9V alkaline battery.
You can adjust the box ID# via the two red buttons. You can also set multiple boxes to the same ID#.
Open the receiving box, if the LED flashes, it means “low battery”. Please replace the battery to ensure the explosion mission is successful.
The receiver will not re-ignite after each explosion. Turn it off and on again. 2m pyrogen-free fireworks clip-on igniter claw-type igniter

balloon detonation system

Transmission frequency: 433Mhz
Remote control range: 400~500M(+/-) depends on the environment
Power supply: both are 9V batteries
Ignition Capacity: 1-2 consumer or display igniters when connected in series
Features: Programmable and scalable
Functions: “Fire All”, “Step by Step” and “Continuous Fire”

A balloon detonation system is a device or set of devices used to remotely trigger the controlled explosion of balloons. These systems are often used in entertainment and special effects, such as at weddings, parties, or theatrical performances.

How it works:

Detonator: A small explosive device, usually a detonator cap, is attached to each balloon.
Firing System: A remote control or timer is used to initiate the detonation.
Detonation: When triggered, the firing system sends a signal to the detonators, causing them to explode and burst the balloons.

Types of Balloon Detonation Systems:

Remote Control Systems: These systems allow for precise timing and control of the detonation. They are often used for large-scale events where multiple balloons need to be detonated simultaneously.
- Timer Systems: These systems are pre-programmed to detonate the balloons at a specific time. They are often used for smaller events or when precise timing is not critical.
Safety Considerations:
- Always follow the manufacturer’s instructions.
- Use the system in a safe and controlled environment.
- Keep the system away from flammable materials.
- Wear protective eyewear and clothing when handling the system.
Legal Considerations:
- Check local laws and regulations regarding the use of explosives.
- Obtain any necessary permits or licenses.
Additional Information:
- Balloon Detonation Systems are available from a variety of retailers, including online retailers.
- Some balloon detonation systems are designed for specific types of balloons, such as latex or mylar.
- It is important to use the correct type of detonator for your balloons.
I hope this information is helpful. Please let me know if you have any other questions.